Original
By certification 
High chrome horizontal slurry pump body, pump cover and wet-end parts
This series of pumps are horizontal, vertical split, double pump casing slurry pumps. The pump body and the pump cover are provided with replaceable metal lining. The lining is made of high-chrome wear-resistant alloy material. The lining can be used until it is worn through, extending the maintenance period and reducing the operating cost.
Here share our High Chrome Alloy material Test Report which used for horizontal slurry pump as below:
Material: High Chrome Alloy A05
Main |
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Mo |
Cu |
Standard |
2.0-3.3 |
≤1.2 |
≤2.0 |
≤0.06 |
≤0.10 |
23-30 |
≤2.5 |
≤3.0 |
≤2.0 |
Test Result |
2.83 |
0.67 |
0.874 |
0.026 |
0.021 |
26.65 |
0.447 |
0.032 |
0.020 |
After check above test report then you will get why our High chrome sand slurry pump has longer service life. Because its wet parts made by Chrome 27.
In view of Chrome material such outstanding abrasion resistance features, our Cr27 slurry pump has widely usges, its Typical Applications:
▪ Ash Handling
▪ Cyclone Feeds
▪ Pulp and Paper
▪ Abrasive Slurries
▪ Coal Preparation
▪ Mineral Processing
▪ Aggregate Processing
Please contact us to get the most professional suggestions!
http://www.mimoflow.net/
