G.hn 1000Mbps Industrial Lightning Protection Anti-interference Powerline Ethernet Adapter for Video

Original
price: Negotiable
minimum:
Total supply:
Delivery term: The date of payment from buyers deliver within days
seat: Jiangsu
Validity to: Long-term effective
Last update: 2017-12-07 04:21
Browse the number: 231
inquiry
Company Profile
 
 
Product details

WD-1000M-G (G.hn) Industrial grade PLC adapter

Brief introduction

The product transmits  the network signals through the existing power line, not need to wire, where is a socket there is a network.  The signal is stable and not be influenced by the obstacles. It is easy to use, just plug and play. It supports 128-bits AES data encryption, can insure the safety of data transmission. It’s stable function, strong anti-interference ability, higher level anti-thunder ability and advanced manufacture technique make the product can meet more demands of the market.


Topology


Specification

Specification

Model

WD-1000M-G(Industrial grade)

Interface

1*LAN 10/100/1000Base-TX self-adapt RJ45,

1*AC220V power interface, support MDI/MDX

LED display light

LAN  PLC  PWR

Transmission band

25,50 and 100MHz and MIMO (based on G.9963)

Protocol(PHY)

IEEE802.3,IEEE802.3x, IEEE802.3u   G.hn

Security

128-AES

Transmission rate(PHY)

800Mbps

Modulation

OFDM

Management

Firmware remote update,support TR-069(optional)

802.1D Ethernet Bridge

802.1Q VLAN

Quality of Service(QoS)

IGMO(IPv4)Snooping&MLD(IPv6)Snooping

Working voltage

AC 85V-265V 60/50Hz

Working temperature

-40℃-80℃

Size

159*65*32mm(L×W×H)

Weight

0.28kg

Working environment

Working humidity:10%-85% no condense

Storage humidity:5%-90% no condense

Certification

FCC、CE class B,WEEE,RoHS


Features

Packet loss rate: less than 0.01% (100 m, 70% load measurement) ;

Support 7 * 24 hours work  ;

Have hardware watchdog function ;

PING value is less than 1 ms.

 

Electrostatic discharge reactance immunity:

The test voltage monitoring unit should be able to withstand: ±6kV Direct discharge ,±8kV air discharge. Discharge time in each sensitive test sites: The positive and negative electrodes 10 times each ,each discharge interval 1s,The test procedure follows B/T 17626.2-2006.

 

Electrical fast transient bursts (common mode) immunity:

The test voltage monitoring unit should be able to withstand: The voltage between power supply   port and ground :±2.0kV,Between signal circuit and earth :±1.0kV,repetition frequency :5KHz,Testing time:1min/time Testing voltage times: The positive and negative electrodes 5times each. The test procedure follows B/T 17626.2-2006.

 

Surge immunity (impact)

The test voltage monitoring unit should be able to withstand: ±2kV,Time interval between successive pulse :1min/time, testing time: The positive and negative electrodes 5times each. The test procedure follows B/T 17626.2- 2006. (Protection adopts the model of full protection and the varistor connects discharge tube in series )

 

Vibration defending

Meet TB1433 MX3 level requirements (0~200HZ, 2g accelerated speed, maximum amplitude 7mm),in the Testing process, it demands the interface no looseness, device desoldering  and falling.


Contact us

Contact Person:Tony Wang

Tel:+86-512-83670078

Mob:+8618796557601

E-mail:lechensales@vip.163.com

Web:www.kunshanwondertek.com


Total0bar [View All]  Related Comments
 
more»Other products

[ Products search ] [ favorites ] [ Tell friends ] [ Print ] [ Close ]